If the rework Work Order is created from RMA, then the user doesn’t need to assign the serial number for the Work Order.  The system will automatically transfer all serial numbers to the new re-work Work Order when the user creates the RMA Receiver.  For a complete discussion of the RMA process, please refer to Article #1610.

If the user MANUALLY creates a re-work Work Order, the following conditions for assigning existing serial number to a re-work Work Order will be:

1. Work Order MUST be a re-work Work Order.
2. There must have been sufficient quantity in FGI to issue to the re-work Work Order.
3. The serial number must match the part number issued.
4. The number of serial numbers to be issued must equal the number of parts issued.

When a Re-work Work Order is established for a serialized product, the user may select existing serial numbers that are in inventory (finished goods) that are to be reworked.  Rework Work orders will not accept NEW serial numbers.  When a serial number is placed in the rework Work Order, the serial number must exist in finished goods, and the number of serial numbers transferred to the Work order must equal the quantity of assemblies for the Work order.  The part number for the serial number that is moved into the rework Work Order does not need to be the SAME part number and revision as the rework Work Order.  Thus, if a user wants to upgrade part number 123 rev A to part number 123 rev B, they can transfer the parts to the Work Order and identify the serial numbers transferred.  Parts may also be changed to a new part number:  Part Number 123 rev A can be placed into a re-work Work Order for part number 234 rev C.  The only condition is that the quantity and number of serial numbers must match.  Once the record is saved a line shortage for the rework work order will be created and serialized parts will be issued to the "Rework" work order and the old part number will be removed from FGI at the time the new part number is moved into WIP.  See example below:

 

 

Serialized Inventory Parts (910-9000 Rev. A1) in FGI

 

 

Create a Rework Work Order using a different Part Number (910-12000 Rev. B)

 

 

Enter the Work Order Serial Number Control Module and enter in the SN's you want to rework, if the SN you entered is found in other locations a screen will appear displaying all the PN's that have this SN in FGI and user can select which PN they want to pull this SN from

 

 

Once user has assigned all the SN's to this WO, they should depress the Save button 

 

  

 

Now user can go to the Kitting Module and release the kit.  The Make Parts #910-9000 Rev. A1) have already been issued to the Kit. 

 

 

And Removed from FGI for the Old PN (#910-9000 Rev. A1)