| Prerequisties - SFT by Bar Code |
ManEx’s standard module configuration allows most users to accomplish their daily tasks. For those users wanting to get more from ManEx by leveraging the total solutions, this is one of the optional modules available for purchase. This module is designed primarily for transfer of products in shop floor tracking and input of inspection data by serial number and defect code. To place an order or to learn more about this specific module or any of the other optional modules please contact us at http://manex.com"contactus.aspx
After activation, "Shop Floor Bar Code" access for each user must be setup in the ManEx System Security module. Users with “Supervisor Rights” will automatically have access.
|
Bar Code Tracking Method
|
Select Bar Code Tracking method in System Setup, Shop Floor Tracking Defaults
|
| Production Planning |
Select Serialization in Work Order Traveler Setup. |
| Work Order Serial Number |
Set up Serial Numbers in Work Order Serial Number Control |
| Bar Code Scanner |
There is no restrictions on the scanner you use as long as it can read Code39 it will work. It also must be a keyboard wedge since we do not offer batch processing. Most scanners require ¼” of white space surrounding the bar code. Laser and inkjet printed labels must have adequate resolution, contrast and clarity to print barcodes that are readable. If you are having problem with your scanner, make sure your scanner isn't set to scan Code39 extended. |
|
|
|
|
|
|
|
|
|
| Article ID: 5508 |
