ArticlesArticles Most Helpful ArticlesMost Helpful Articles Language SettingsLanguage Settings LoginLogin
RSS Feeds
DrillDown Icon Table of Contents Back
 . . . . . . . . . . . . .
DrillDown Icon Utility
DrillDown Icon Sales Management
DrillDown Icon Inventory Management
DrillDown Icon Material Planning
DrillDown Icon Production
DrillDown Icon Quality/Engineering
DrillDown Icon Statisical Quality Control (SQC) (OPTIONAL Module)
DrillDown Icon Corrective Action Request (CAR) (OPTIONAL Module)
DrillDown Icon Integrated BOM & AVL
DrillDown Icon Prerequisites
DrillDown Icon Introduction
DrillDown Icon Fields & Definitions
DrillDown Icon How To .....
DrillDown Icon Find a BOM
DrillDown Icon Adding Header Info
DrillDown Icon Adding BOM Line Items & BOM Copy
DrillDown Icon Drag & Drop Procedure
DrillDown Icon Manual Entry
DrillDown Icon Copy an Existing BOM
DrillDown Icon BOM Deletions
DrillDown Icon Edit Line Item Details
DrillDown Icon Bill of Material (BOM) Used in Kit Option
DrillDown Icon BOM Setup Scrap Checkbox
DrillDown Icon Make a Obsolete Part Available on a BOM
DrillDown Icon Reports
DrillDown Icon FAQs
DrillDown Icon ManEx Minutes (BOM)
DrillDown Icon Express Import to BOM or Quote (OPTIONAL Module)
DrillDown Icon ECO, BCN & Deviation Control Mgmt (EBD) (OPTIONAL Module)
DrillDown Icon Work Order Traveler Setup
DrillDown Icon Product Data Management (PDM) (OPTIONAL Module)
DrillDown Icon PDM Standard Process Specification
DrillDown Icon Administration
DrillDown Icon eManEx
DrillDown Icon ManEx Minutes for All Modules
  Email This ArticlePrint PreviewPrint Current Article and All Sub-Articles
 
Manual Entry

Procedure for Manually Adding Line Items

Use this procedure as an alternative to Drag and Dropping from the Inventory Summary screen.

Open the Integrated Bill of Material & AVL BOM Main screen and Find desired Header.

To add a component, click on the Add Record button, enter password.

The following screen will appear:

Select "Yes" or "No" to Auto Line Item Numbering.

 

 

The item detail screen will appear:

 

In the Item Detail screen select Work Center to Kit to (use Material Staging if not known), from the drop down menu:  

Then select Source (Make, Buy, Consigned or Phantom), from the drop down menu:
 
When building a BOM in order to have the Source "CONSIGNED" displayed a Customer MUST be assigned to the BOM.
 

When building a BOM and you enter the source as a “Phantom”, then when entering the part number that is a “Make/Phantom”, the source changes to a Make” part.   The reason the source field shows at all is to limit the number of part numbers that are available to choose from.   But you can enter any valid part number and the source will change to the source of the part number entered.  So, yes, the source of the sub-assemblies will show as a “Make” part, even though they are actually “Make/Phantom” parts. The details of the BOM will also show they are “Make/Phantoms”.   We allow nested phantoms, of either the “PHANTOM” or the “Make/Phantom” variety.  In kitting, we have the code to blow down through the first level of make/phantoms, so that the parts included in the first sub-assembly level down are listed as kit requirements. We have extended this further so that if there are Make/Phantom parts in the first sub-assembly level, those also break down to the components in the second sub-assembly level.  This process extends as long as there are “Make/Phantoms” in the indented BOM.

 

Either enter the item number by typing it directly into the Part Number field or select Part Class and Part Type, as illustrated below:

Select the Part Class.

 

Select the Part Type.

 

Depress the down arrow next to the Part Number box. A list of all of the inventory parts within the selected Class and Type will appear.

Type the Part Number into the Red box or highlight and double click to select.

If the item is a Consigned Item, enter either the Customer part number OR the Internal Part number, in the respective fields

 

 

If you added an internal part and if there is a matching Customer part number in the Inventory Customer screen, it will automatically appear as soon as the internal inventory part is selected.  Conversely, if you typed in a customer part number, the internal part number information will automatically appear.

Enter the Quantity of the item required for each assembly produced.

(Note: Extra parts for setup or run losses should be added in the Inventory Control Mgt. Item Master Run Scrap % or Setup Scrap Qty. field, not in the Bill of Material.)

Enter the production offset days by toggling on the up and down buttons.

If the component is to be pulled in the kit, leave the Y in the Kit box.If not, remove it.

Enter the effectivity and obsolete dates, if desired.

Depress the AVL & Reference Designator tab

All the AVL's will default in as approved and require the user to deselect as desired.  If no AVL's are approved a popup will appear forcing the user to approve at least one AVL. 

When the BOM for the assembly has a customer assigned to it, then ManEx will pull the approved AVL's from the customer side NOT the internal side. For example: Part “XYZ” may have several AVL’s and several different customers linked to it.   Each customer may approve different AVL’s. So when the part is linked to a specific customer’s BOM only the AVL’s linked to that customer part will be displayed on the BOM as approved. The AVL screen looks at the accepted AVL’s for that customer on the “consigned” or “Customer” side of each part whether it was added to the BOM as a “BUY”, “MAKE” or “Consigned”. If no customer is assigned to the BOM then the AVL’s will be pulled from the internal side.  NOTE:  If "GENR" is approved on the BOM MRP will consider any inventory for that part even if the AVL is NOT approved on the BOM.  For further detail refer to Article #2560 .
 
 
Enter the Ref designators manually in the table or enter the prefix letter, Start No and End No and depress the Calculate button to auto-number. 

If you want to add alternate parts, depress the AVL and Reference Designator tab. Depress the Add button next to the alternate parts section of the screen.

The following selection option will appear, Select Internal Part Number, enter the part number in the red box.  

If you select Consigned Part Number, select a Customer from the pull down list, enter in the Customer Part Number in the Red Box. 

 

Information regarding the alternate part will display in the bottom section, as displayed below.

Once user has completed entering all information for line item number, depress the Save button.

 

 

Article ID: 2144